Rear +/- 1.75 degrees of adjustment.Kit comes in 1 pairBrand new, never been used or mountedA must for lowering vehicles
Precision Alignment Kits for Maximum Performance-
and Prevents Uneven Tire Wear Wider Range of Camber Adjustment-
Suitable for Street or Track Tuning Two Year Warranty After the installation of either an Eibach Pro-Kit, Sportline spring kit or Pro-Street coil-over kit, a vehicle's alignment should always be checked. Once a vehicle is lowered, wheel camber may become excessively negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in compromised handling and accelerated tire wear. Eibach offers a complete range of Pro-Alignment kits, which provide a simple, affordable solution to correct excessive negative camber. These alignment kits not only assist in adjusting a vehicle's camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to "dial-in" a performance-oriented alignment that uses negative camber to maximize a chassis' true potential. With correct alignment, turn-in becomes more precise and handling becomes gratifyingly crisp and predictable. High-speed stability is also enhanced, making an Eibach Pro-Alignment kit a necessity for the serious performance tuner. For the extreme lowering of Sportline and Pro-Street applications, look for the alignment kits with a greater range of alignment necessary to accommodate the extreme lowering. These will be listed below the standard Pro-Alignment kit in the applications section.
Most merchandise usually ships out from our facility or directly from our vendors in 2-3 business days.
Please allow another 5-7 business days (est.)for products to be delivered after its shipped. For all special orders or made to order items, shipping time are not guaranteed. Please call us for an estimated delivery time.
We ship with Fedex, UPS or USPS for all products with smaller dimension such as headlights, tail lights, headers, exhausts, etc. . All oversized item will be handled by LTL carrier such as bumpers, carbon fiber hoods, fiberglass hoods, large trunks. Etc.
Shipping insurance: All shipping and handling included delivery or signature confirmation and additional insurance to protect your items in case of damage during shipping.
Shipping to all Po box, US military addresses at overseas locations (APO/FPO): VIA USPS Only (No Over-Size Items).
Eibach products are created to meet the extreme requirements of racing, from the 245-mph Mulsanne straight of Le Mans to the fender-to-fender combat of the Daytona Motor Speedway.
The chassis of a production vehicle is designed to be built at a minimum cost, and suited for an "average driver". We enthusiasts, however, are anything but average. We know what we want from a vehicle. We want immediate response, reduced body roll, increased stability and enhanced cornering ability. And we want the look that comes with those characteristics-a lower, more muscular, more athletic stance.
The special skills of Eibach engineers are in the tuning of the individual components (springs, dampers and stabilizers) to achieve the best possible harmony between the driver, the automobile and the road. As a driver you immediately feel more direct handling and greater predictability. Nose dive under braking is reduced, as well as excessive body roll in hard cornering. In any performance driving situation, tracking stability-and driver confidence-is greatly enhanced.
Eibach production technology is recognized worldwide as leading its field, from our high-strength spring-steel alloys, our advanced CNC winding process, our high-quality corrosion protection and the legendary longevity of our components.
The entire process, from initial development to final shipping, is subject to a rigid Quality Control System that is certified by the highest ISO 9001:2000 international quality standard. In fact, Eibach operates in accordance to its own, often more rigid, specifications. When you see the Eibach logo on a part, you can be sure that it is of the highest possible quality.
Eibach springs have supported innumerable race and championship winners over the last two decades. In series as different as Formula 1 and NASCAR, the winning factor is often chassis setup and tuning. When everybody has comparable power, the guy who wins is the guy who can put that power to the ground-and maintain his momentum through the corners. The list of Eibach partners reads like "Who's Who" in Motor Sports: AMG, Audi, BMW, Ferrari, Ford, Honda, Lamborghini, Lola, MazdaSpeed, Mitsubishi, Nissan, Subaru, Porsche, Renault F-1, Toyota, and many, many more.
Whether you're talking about F1, NASCAR, WRC, CART or Indy Car, Eibach regards Motor Sports as the ideal proving ground. The experience we gain at the highest levels of racing is directly converted into the development of the highest-grade chassis components on the planet. And the enthusiasm created by the challenges of motor sports drives us to ever-higher performance-performance that you will enjoy every time you pull out of the pits-or your own garage.
At Bodykits4me.com we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the automotive industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.
Return Policy
If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:
- Products must be in original packaging and in a new and resalable condition.
- Any product that was used or fully/partially installed is non-returnable.
- All returned products have a flat Restocking Fee of 25%.
- Shipping Fees are non-refundable.
- Original shipping cost will be deducted (For all shipping cost included deals).
- All returns must be made via our Return Procedure with a valid RMA form.
- There are few non-returnable products & services that are listed in section below.
- Order cancellations can only be requested prior to shipment or in some cases, prior to the start of the manufacturing or painting process.
Please note: If the return of an item was caused by an error on our or a manufacturer's part, restocking and shipping fees do not apply
Return Procedure
To return a product you must first request a Return Merchandise Authorization (RMA). The RMA form will include an exact return address and detailed instructions on how to return a product. You may request an RMA using the following methods:
Please let us know which particular item(s) you would like to return and the reason. If you believe you have received the wrong /defective products, please take detail image shots of the product and email to us. Please allow 24 to 72 hours for processing since in many instances, we have to wait for a manufacturer's response.
Exchange Procedure
There are 2 ways you can go about exchanging a product:
Option 1 (Slower) – Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is difference in price, you will be either refunded or charged the difference. Restocking will applied.
Option 2 (Faster) – Order the new part online or over the phone so it can be shipped to you right away. Then request an RMA using a standard Return Procedure for the part you would like to return. Upon return of the part a refund will be issued promptly.
Defective, Damaged, or Incorrect Products
If your product(s) arrive defective, damaged, or simply incorrect, please contact our customer service depart as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.
When a replacement part is requested to be shipped prior to the return of original merchandise, we must temporarily authorize your credit card until the original merchandise is returned.
Non Returnable Products & Services:
The following products cannot be returned/exchanged due to manufacturer's policies or their made-to-order custom features:
- Any item marked or classified as non returnable.
- Electronics related parts.
- Any custom orders or parts.
Refunds & Credits
After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order (Credit Card, Paypal, or Check). The refund amount will be composed of the original purchase price minus shipping charges and applicable restocking fees. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.
Bodykits4me.com will not refund any labor charges or installation fees under any conditions. Bodykits4me.com will also not offer reimbursement for any damage acquired during installation or any other use of a product.
|
Copyright 2008 Bodykits4me.com - Body kits & more, All Rights Reserved